Floodlight control that thinks ahead.
Scenes via app, presence sensor and time programmes: your site shines as brightly and as long as it is needed.
One click, one scene.
Football pitch example. Values according to DIN EN 12193, shown schematically. Which levels your site reaches is determined by the lighting design.
Choose scene
- Use
- Training, school and recreational sport
- Lighting class
- III
- Average illuminance
- 75 lx
- Uniformity
- 0.5
- Switched on
- all masts
Schematic diagram, not a lighting calculation. Values for football per DIN EN 12193. Which levels your site achieves follows from the design.
What the control can do
We use the Autani lighting management system. The luminaires form a Bluetooth mesh, controlled via the app.
Scenes
Training, match play, competition: each use gets its own light level.
75 · 200 · 500 lxClass III, II, I in football
Sub-areas
One half of the pitch, a single court: what is not needed stays dark. This saves energy and is gentler on the neighbourhood.
App
You set groups, scenes and dimming levels in the app. Nobody has to climb the mast.
up to 100 mWireless from luminaire to luminaire (EFS106W)
Presence
When nobody is left on the site, the floodlight dims down or switches off after the delay time.
IP66Weatherproof EFS106W sensor
Time programmes
Switch at a fixed time or depending on dusk, on request only on training days.
±120 minOffset from sunrise and sunset
Energy data
On request, the system records when which floodlights were lit and how brightly. Only if you want it.
Frequently asked questions
Can I change scenes myself later?
Yes. You set groups, scenes and dimming levels in the app. Nobody has to climb the mast.
Will the lights go out while someone is still training?
The presence sensor only dims down after the set delay time once it no longer detects movement. You define the delay time and dimming level in the app.
Can existing LED floodlights be retrofitted?
That depends on the driver. It needs a dimming interface, and for the EFS106W sensor a dim-to-off driver with a 12 V AUX output. We check this from the nameplate or datasheet.
Do I have to have energy data recorded?
No. Scenes and dimming also work without recording. We only set up the energy data if you want it.
Plan control for your site.
Tell us how your site is used. We suggest groups and scenes that fit.
Start enquiryTalk directly
